Hilti

Why r/BuyItForLife recommends Hilti

24 mentions from real owners

• #1Dec 31, 2025

  What’s the secret with pro spray foam guns?

  AFAIK they’re fine sitting on a shelf if you just leave the can on. They sell a can of acetone that you can screw on to it but the can also comes with a spray tip and that’s where it’s really useful. Keep it handy and immediately spray the part where the foam can screws on when you change cans and spray the nozzle whenever you stop using it. The acetone only dissolves the foam while it’s still liquid so it’s useful for a very short amount of time but it’s incredibly useful.

  View on Redditopen_in_new
• #2Dec 2, 2025

  My grandmas drill that she gave me to use to hang curtains

  Hilti is also super good quality. They usually only sell to businesses, but some tools are also available for consumers in their online shop

  View on Redditopen_in_new
• #3Aug 6, 2025

  $2K Amazon Budget—Help Me Turn Digital Money Into Sawdust

  Presuming g this is just about basic home ownership: One approach is to look at by tasks you’d likely tackle. First off is painting and drywall repair. Some good name brand wall knives, disposable drywall cutting knives, trowel and some small putty knives. My dad and I have been painting forever and our tools are easily 20 years old. Just wash and dry after use. Get some name brand paint rollers, brushes and a metal tray or two. Some real drop clothes. You’d likely need to do some demo at some point too. A painters four in one or five in one tool is a great chisel, hammer, scraper and more in one tool! Trim removal tools and demo hammers are worth an investment. Check out Stanley fat max fubar. I’d guess maybe an overall $300-500 budget for all this? You’ll probably wind up replacing some outlets or fixtures so get some basic electrical tools. A decent multimeter, some wire strippers (I like the spring powered ones you squeeze) and some small wire snips or similar. An inexpensive battery powered screw driver helps here to as drills can be overkill here. $100? An electric pressure washer and foam gun is great for Keri g the house clean. Maybe $250ish? A basic mechanics socket and wrench set can be useful, not just for cars but appliances and some odds and ends. 1/2 drive is likely overkill. Maybe $200? Craftsman should still be honoring warranties at Lowe’s should anything break. That may be a good starting point for evaluation. Get a large adjustable wrench or two for some basic plumbing. Nothing else will do the trick here. I’d imagine you need some garden type tools too. A leaf rake, metal rake, flat shovel and spade shovel will all get used routinely on nearly any property. Depending on climate, a snow shovel or maybe a snowblower. That could easily eat half the budget here but unless it’s a huge driveway or you’re in he snow belt, I wouldn’t go higher. As others have mentioned, there’s a lot to consider with power tools. You are absolutely buying into a battery ecosystem and one that may even include lawnmowers and similar too. Two recommendations are: Hilti (expensive pro grade) is the only one with a warranty due to wear and tear. Everything else is mfg defect only. Hilti and Makita are the only ones where the company only owns that. The rest are part of umbrella corporations and I question how much some of these brands are cared for or may even last. Lowes and HD have also driven down the quality on a lot of tools (and mowers and blowers etc) because they want a certain price point instead of building what’s really needed. I want to say Makita has bowed out or pulled a lot out from HD over this but I could be wrong. Also, YouTube is incredibly helpful with evaluations. Start with Project Farm and you’ll see what I mean.

  View on Redditopen_in_new
• #4Jun 8, 2025

  The best vacuum money can buy?

  I came to say that, forget consumer vac and go buy a shop vac, Hilti, Festool etc. it will outperform and outlive any home vacuum

  View on Redditopen_in_new
• #5Jun 8, 2025

  The best vacuum money can buy?

  Hilti shop vac

  View on Redditopen_in_new
• #6Apr 6, 2025

  I’ve always been a Makita guy without knowing anything about the corporate side. My tools always just felt more solid and durable than coworkers’ Dewalt or Milwaukee. Then I saw this in r/construction.

  You damn sure ain't random diy if you're buying Hilti. Going into their showroom feels like sneaking into a secret r&d lab. I saw stuff that blew me away that i never knew existed. Like 25 yrs ago i was fitting pipe for my dad, riding along for supply and tool run. I learned innovation is expensive, so if it's not necessary or justified easily, then stick to the script. I saw those quick clevis hangers and was almost willing to buy them myself until i saw the price. Sch80 pipe sure is heavy at any diameter, especially if you're in tight quarters with obstacles working for a small contractor (or family). I managed to talk him into buying a pair "just in case"... They cost about 4x price, so i get why. Mr. Hilti may be long dead, but his innovation changed everything; especially for rivets, holes, and powder actuation. These youngbloods will never know just how much relief those tools gave to the men building bridges, connecting iron, and everything else epic in scope.

  View on Redditopen_in_new
• #7Apr 4, 2025

  I’ve always been a Makita guy without knowing anything about the corporate side. My tools always just felt more solid and durable than coworkers’ Dewalt or Milwaukee. Then I saw this in r/construction.

  I was and electrician for 22 years. Yep, Makita and Hilti were practically all we used til around 2015 when Milwaukee entered the chat. Milwaukee has great innovations, but need to work on the durability.

  View on Redditopen_in_new
• #8Apr 4, 2025

  I’ve always been a Makita guy without knowing anything about the corporate side. My tools always just felt more solid and durable than coworkers’ Dewalt or Milwaukee. Then I saw this in r/construction.

  R/Tools moderator here. Makita will basically continue to repair their products forever. They are far and away the best consumer tool company. Hilti is similarly good but much higher price point.

  View on Redditopen_in_new
• #9Apr 4, 2025

  I’ve always been a Makita guy without knowing anything about the corporate side. My tools always just felt more solid and durable than coworkers’ Dewalt or Milwaukee. Then I saw this in r/construction.

  One day I will buy a Hilti Powerdrill.

  View on Redditopen_in_new
• #10Apr 4, 2025

  I’ve always been a Makita guy without knowing anything about the corporate side. My tools always just felt more solid and durable than coworkers’ Dewalt or Milwaukee. Then I saw this in r/construction.

  No it doesnt. Example is bosch. Their professional line is better than makita imho and makita is years behind on battery tech. What makita does with 40v, bosch and hilti do with 18v. I like my makita stuff but bought it only because there was nothing from bosch back then that did the job (gardening tools espcly). I'd Pick bosch over makita for Innovation only, but thats the problem if you only do one thing. Bosch most likely has way more experience with batterys and drivers since they also built many other stuff for other Industrys that need similar things like ebikes, cars ect.

  View on Redditopen_in_new
• #11Apr 3, 2025

  I’ve always been a Makita guy without knowing anything about the corporate side. My tools always just felt more solid and durable than coworkers’ Dewalt or Milwaukee. Then I saw this in r/construction.

  Hilti is BIFL

  View on Redditopen_in_new
• #12Apr 3, 2025

  I’ve always been a Makita guy without knowing anything about the corporate side. My tools always just felt more solid and durable than coworkers’ Dewalt or Milwaukee. Then I saw this in r/construction.

  I work strictly with Hilti products. They are amazing tools but they are priced for commercial use only. The reason it's so expensive is because if you have a Hilti product that breaks, they will have a replacement for you within 24 hours.

  View on Redditopen_in_new
• #13Apr 3, 2025

  I’ve always been a Makita guy without knowing anything about the corporate side. My tools always just felt more solid and durable than coworkers’ Dewalt or Milwaukee. Then I saw this in r/construction.

  Makita. Hilti. And festool. All you need

  View on Redditopen_in_new
• #14Apr 3, 2025

  Meta: Can we stop with the "but its all made in the same factory" BS

  If you don't think there are cheaper and more expensive bearings, that HILTI uses the same bearings as Ryobi, then I've got a bridge to sell you. I literally have other people chiming in that work in various industries agreeing with me.

  View on Redditopen_in_new
• #15Apr 3, 2025

  I’ve always been a Makita guy without knowing anything about the corporate side. My tools always just felt more solid and durable than coworkers’ Dewalt or Milwaukee. Then I saw this in r/construction.

  While they don't get a pass for that asinine coffee maker, they were always our tool of choice going back to the early 90s. Funnily enough, anything that couldn't be solved the a Makita, usually required breaking out a Hilti. So much so that the brand became synonymous with our jackhammer. I'm pretty sure my dad still owns his original cordless Makita impact driver from more than thirty years ago. I should see about doing a lithium mod on it for him, since the old stick magazine batteries have long since given up. And I know he still has his Makita hammer drill from the 80s. Between that and the Hilti, there was never a bit of concrete or cinder block that could bog down a jobsite. 

  View on Redditopen_in_new
• #16Apr 1, 2025

  What to buy for upkeep of house as a 22M?

  for BIFL quality, Bosch, Makita and Hilti would be my recommendations.

  View on Redditopen_in_new
• #17Feb 10, 2025

  What brands do you trust to always deliver a high quality product?

  Bosch, Hilti

  View on Redditopen_in_new
• #18Feb 7, 2025

  What brands do you trust to always deliver a high quality product?

  Hilti

  View on Redditopen_in_new
• #19Feb 3, 2025

  A list of BIFL not made in the USA

  Bosch Blue Line (Germany), Metabo (Germany/Japan), Hilti (Austria)

  View on Redditopen_in_new
• #20Feb 3, 2025

  A list of BIFL not made in the USA

  Makita tools are generally very repairable too. A good way to find tools that are good quality and last a while is to see what tool rental places use. They’re looking for longevity/repairability so they get a better ROI. Usually those end up being Makita or Hilti in my experience.

  View on Redditopen_in_new
• #21Feb 2, 2025

  Which tool brand ecosystem would you invest in for 2025 and why for the occasionally frugal DIYer?

  as a professional cabinetmaker / constructionjoiner Bosch (BLUE, dont get bosch green its dogshit) 18v battery powerd for every usual non-woodworking specific thing, drills, hammerdrills, sawzalls, jigsaws etc. also compatibale with a lot of great manufacurers because of 18v allience Fein (compatible with Bosch 18v if bough with AMPSHARE batteries) for Multitool (even though new Bosch one is definitly better) Mirka or Festool for sanding Otherwise for anything woodworking specific as well as vaccumes: definitly festool. Best tracksaws, routers, good orbit sanders. For rough timber frame carpentry: Mafell For drilling in concrete: Hilti FOR BEGINNERS OR HOBBISTS: Metabo: good overall, usually quiet inexpensive, made in germany, outstanding quality for price and features, practically bosch for hobbists. Also has 18v allience named CAS, would recomend to anyone looking for tools. Bosch: pretty expensive, but got everything you need. especially the basics. Practically last forever, especially corded tools. Has all the cool stuff form the specialist brands in blue. Milwaukee: Only worked with 12v dirlls, but seems pretty good in quality. Cons: made in china, no compatability with anything, just as expensive as bosch, more expensive then metabo. IMPORTANT: Get corded tools (with exeptions). You dont need everything battery powerd. Especially stuff that you use a lot in one secession, or only very few times. MY SUGGESTION: 12v or 18v Drill by Metabo (or just following hammerdrill with regular attachment) Bosch GBH 2-21F for concrete drilling, drilling big holes and driving large screws, great drill, lasts generations, pretty cheap aswell Old used festools Tracksaw TS 55 or 75 (corded) random old orbit sander, from above mentioned brands otherwise just get the stuff you need from the manufacturers i mentions "as for begineners" STAY AWAY FROM: Ridged, Ryobi, Makita (kindof), mayby dewalt (feels wierd and cheap) as well as hilti, hitachi (ex hioki) and mafell. just to expensive with practically no compatability

  View on Redditopen_in_new
• #22Feb 2, 2025

  Which tool brand ecosystem would you invest in for 2025 and why for the occasionally frugal DIYer?

  I have had the same ryobi impact for 10+ years. Just did a huge addition with it. I recently bought a set of Hilti drivers and rotohammer. I definitely think the light on the hilti impact is incredible. It drives smoother. But 10 years and thousands of screws out of the ryobi, still kicking.

  View on Redditopen_in_new
• #23Feb 1, 2025

  Which tool brand ecosystem would you invest in for 2025 and why for the occasionally frugal DIYer?

  Makita and Hilti are the only companies who are stand alone with no corporate siblings. The price is slightly higher but I think there’s less chance that one of their tools is from their bargain basement, built to a price point to appease Big box marketing VPs, etc. And of all of them, Hilti is the only one who warranties for wear and read and not just defect. For a handy homeowner, I would spend the little bit more for Makita. Chances are that it will last longer than the alternatives.

  View on Redditopen_in_new
• #24Jan 7, 2025

  Some good articles for Europeans?

  Had to say it for Bosch. If it is for home use all of their products are fine. If you really need to work go for Hilti(when you insist on German) or definitely Makita. No word on Miele, personally I don't understand why they're not world famous.

  View on Redditopen_in_new